The problems, which are caused by the conventional (unshielded) power cords, are twofold. At the one hand they emit a hum of 50 Hz together with a very broad spectrum of distortion, which influences other audio cables in a negative way. At the other hand it is not allowed for the clean voltage coming from the KE-POWER SOURCE to be infected again by distortions.

From this one may conclude that a conventional power cord works as a receiving/sending aerial for distortions. Moreover power cords should absorb rather than reflect these distortions.

The KE-HI POWER CABLE is selected out many different other cables by means of listening sessions. The KE-HI POWER CORD, because of its heavy construction (sturdy conductors), is very suitable for the supply of current to the power amplifier. The KE-HI POWER CORD is deliverable in any length, the maximum - 3m, minimum - 1m (multiples of 0.5m). UK plug to IEC.

The KE-POWER CORDS should be connected to an earthed power socket at all times to enable the direction of distortions toward the earth. Despite the good shielding of the KE-POWER CORDS, it should always be kept as far away as possible from other signal cables.

When connecting the KE-POWER CORDS in combination with the KE-POWER SOURCE to your audio/video equipment, you will notice that it is an absolute must, and that they have a same influence of quality as any high quality interlink or loudspeaker cable! The use of the KE-POWER CORDS together with the KE-POWER SOURCE results in a more powerful low- and midrange tones, more open and clearer high range tones, more details and soundstage and more dynamics.