Audio Note AN-CABLE-600a, AN-La speaker cable

Click to Zoom
Audio Note AN-CABLE-600a, AN-La speaker cable

Audio Note`s litz version of the AN-CABLE-550, double-stranded, as in one length can connect to one speaker (2 conductors). Screened 6N litz copper speaker wire. Black outer sleeving. Outer dimensions are 5.75mm height x 12.5mm width.

Litz is composed of very fine strands of high purity copper wire insulated from each other with a fine polyeurthane coating, then bundled to form a larger gauge wire. The varnish on each strand must be scrapped off before a good solder joint can be achieved. You can flatten the wire, then use a single-edged razor blade held 85-90 degrees to "shave" the varnish off the wire. After removing most of the varnish, use a 40-watt solder iron and a bit of solder to burn off the rest. A scum will bubble up and harden after the wire cools off. A solder pot can also be used to burn the varnish off.

This wire is also available in offcut lengths at a discounted amount here

Sold in multiples of 1 metre (mono, for one speaker), supplied in one continuous length.


PRICE, 1m length
£58.01 +vat+p&p

Wiring Diagram

Subscribe to Hifi Collective