A superb low cost shunt stepped attenuator, featuring metal film PRP PR9372 series 0.5W resistor as the shunt resistor. Available in various versions as mono, stereo or stereo balanced for the XLR users. Available as a kit or built up, 10K, 20K, 25K, 50K, 100K or 250K. Can be purchased with the Glasshouse passive pre-amp.
You have a choice of which switch to use:
Starting with the lower cost Blue range, using the 2 pole 24 way for the mono & stereo (one wafer is not used in the mono version) & the 4 pole 24 way for the balanced Stereo. Then we have the Elma switch, the most popular choice, using the 1 pole 24 way for the mono, the 2 pole 24 way for the stereo and the 4 pole 24 way for the balanced stereo. And finally the esteemed Seiden switches, with their fabulously smooth turning action. Here we use the 1 pole 23 way, mono, 2 pole 23 way, stereo and 4 pole 23 way for the balanced stereo.
Load resistor choice:
At each step of your attenuator the signal always passes through the load resistor, so making it a key component and well worth an upgrade. The best you can buy is the Charcroft "Z" bulk foil, at 0.1% tolerance it offers amazing sound stage, also it carries incredible detail. Also we have on offer the Audio Note Tantalum 1W & 2W resistors, slightly improved on these are the Shinkoh 1W & 2W. We also have the Takman carbon and metal films at 1W, not forgetting the Mills 12W, a strange choise you may thing but amazingly good.
As standard with the we supply the PRP Metal Film 0.5W resistor as your load resistor. To upgrade your load resistor, if you were ordering the 100K stepped attenuator and you wanted to upgrade to the Charcroft then simply order 1 off for mono, 2 off for stereo or 4 off for balanced stereo.
available in 10K, 20K, 25K, 50K, 100K, 250K
PRICE (1 off) excluding VAT+P&P
starts from £29.84, see price list below for full list or click BUY NOW below