WBT-0108 Topline RCA Connector
The clamping mechanism, which works in the same way as the chuck device in a drill, firmly clamps the outer contact against the RCA socket. The high clamping pressure not only guarantees a secure connection but also minimises transition resistance. In addition, any size variation in the outer contact of a socket is compensated for, thereby ensuring a perfect fit.
The clamping sleeve is designed with two sections so that the front section moves freely as the rear section is turned. This eliminates the risk of torsional strain on the contact elements.
WBT-0108 is designed for crimp connection. The positive and negative conductors are tightly screwed in place in the crimp cages using Torx screws. The screws have a fine thread to ensure long-term high-pressure connection. This intelligent component is machined from a single piece of material, thus eliminating unnecessary transition resistance.
The central pin is slotted and ideally formed thereby giving a firm yet elastic contact which ensures lasting and reliable electrical connection with absolutely minimal transition resistance.
The metal parts are made from a special copper alloy and are 24 carat nickel-free gold-plated to prevent oxidation, which could negatively impact on contact quality.
When combined with WBT RCA sockets, the contacts are positioned in such a way that the outer conductor is in contact before the inner conductor, thereby preventing undesirable or even harmful voltage peaks.
A Torx screw provides reliable cable strain relief on the cable.
*Teflon is a registered trademark of Dupont.
High quality crimping WBT RCA plug, metal parts are made from a high copper content alloy, 24 carat nickel-free gold-plated to prevent oxidation.
The positive and negative conductors are tightly screwed in place in the crimp cages using Torx screws.
Will receive cables up to 9mm in diameter.
Sold individually, available with red or white markings.