It was turn for the well-tried WBT Sandwich Spades to undergo their very special 'nextgen' update. The signal conductors (of the Ag versions) have always been built of fine silver and their construction already was based on the minimal mass principle.
New thing is that the base body of the spade now represents a nearly metal-free construction to become a 100% nextgen connector. You will certainly enjoy a much more detailed and spacious sound performance of your HiFi set!
The key to the superb quality of this spade lies in the patented* Sandwich design of its contact fork: Elastomer oscillation dampers eliminate airborne noise and mechanical vibrations as well as magnetostrictions.
This ensures almost total suppression of contact microphonics, and there is no interfering ancillary noise. The fracture resistance of the connection is improved at the same time.
The sandwich design of the contact forks with elastomer inserted in a steel cap generates high and uniform contact pressure while minimising transition resistance.
Four punched contact points on the bottom of the fork ensure precision contact. The quality of signal transmission is markedly improved, particularly with high currents or small voltages.
The surface of the silver conductor is protected against oxidation by a platinum surface coating to underpin the low transition resistance levels in the long term.
The spade is connected to the cable by means of crimping. The two Torx screws with fine thread are making for a reliable connection with high tensile strength. The plug elements are fully insulated and meet the CE and IEC safety requirements.
WBT-0661 Ag 6 mm fork (1/4 inch)
Can receive cables up to a diameter of 3.6mm, 7 AWG. The termination technique is by crimping. available with red or white markings. Sold individually.