The ultimate wire for rewiring your tonearm, made from three individually insulated strands of 0.05mm Audio Note 99.999% pure silver wire, each strand has 6 coats of polyurethane. Note 99.999% pure silver wire, this is not just the best sounding wire, it is also the most flexible, so why not upgrade the sonic performance of your tonearm dramatically with a rewire.
Available in: Blue (AN-WIRE-310)
And Clear (AN-WIRE-300).
Sold in multiples of 0.5 metre. We supply in one continuous length. Generally, 50cm lengths are adequate for rewiring a tonearm.
Please note this wire is incredibly thin and a certain amount of skill is required to use. The wire will disintegrate if heated too much.
To outline the process - tin the tip of your soldering iron with solder. While the solder is smoldering quickly run the wire end through the bubble of solder. Allow the wire to cool and repeat. After 2 or 3 times the polyurethan coating has melted and end of the wire will be tinned. When soldering to your cartridge clip, tin the clip and while the solder is liquid dip the wire end in. Do this quickly.
PRICE, 0.5m length