Cardas 101, 2 x 14 AWG, OFHC Copper Speaker Cable

Two 14 AWG conductors. Ideal for an entry-level, DIY speaker cable. Also suitable for pro PA speaker systems.

Conductors: Air-tube core, Cardas OFHC bare copper. Gauge sizes scaled to Golden Ratio proportions. Cross-field layer geometry, insulated in a poly jacket.

Geometry: Twisted pair two-conductor with natural cotton filler bound together with PFA tape. Super flexible TPR outer jacket.

• Gauge: 2x14 AWG
• Outside Diameter: 0.365”/9.27m

Preparing 101 is simple:

1. Cut back a couple inches of the grey outer jacket, and you'll find two 14 AWG conductors, surrounded by white cotton dielectric.
2. Cut away the dielectric, and strip about an inch of the red & black jackets from the conductor.
3. Untwist the copper wires, and you'll find a non-conductive core filament. Snip that away, and re-twist the conductor.
4. At this point, you can use it as a bare-wire cable, and insert the twisted copper into your binding posts. Or solder spades or bananas onto the ends. You can also use crimping spades with 101 Speaker. 
5. Cut back a couple inches of the grey outer jacket, and you'll find two 14 AWG conductors, surrounded by white cotton dielectric.
6. Cut away the dielectric, and strip about an inch of the red & black jackets from the conductor.
7. Untwist the copper wires, and you'll find a non-conductive core filament. Snip that away, and re-twist the conductor.
8. At this point, you can use it as a bare-wire cable, and insert the twisted copper into your binding posts. Or solder spades or bananas onto the ends. You can also use crimping spades with 101 Speaker. 

Sold in multiples of 1 metre. We supply in one continous length.

PRICE (1 metre)
£16.68 +vat +p&p