Audio Note pure silver wire, AN-WIRE-030 (1mm dia.)

99.999% single-core pure silver wire sheathed in a polyurethane coating suitable for hookup wire, making your own interconnect, low-level transformers, output transformers, power supply chokes, and inductors for speaker crossovers. Polyurethane coated, 1mm diameter.

HOW TO REMOVE POLYURETHANE COATING as described by Audio Note

"We would use a solder bath/solder pot set between 400 - 420 Degrees C. Dipping the wire end in the bath, not longer than 1 - 2 seconds, as it can cause damage to the thinner gauges. Repeat if need be.

You can use a solder iron set at around 450 Degrees C; the coating will eventually burn off, but be patient, and you will use lots of solder. Alternatively, with the thicker gauges, you can scrap off the sharp blade. The remainder can be burnt off with a soldering iron or solder bath. Please use a solder fume extraction system."

This wire is also available in offcut lengths at a discounted amount here

Green and yellow are available. Sold in multiples of 1 metre. We supply in one continuous length.

Please note we cannot guarantee the colour of the polyurethane coating of this wire as it does vary

PRICE (1m)
£43.14 +vat +p&p