Audio Note AN-CABLE-800-M, AN-SPa Silver Speaker Cable

First in the range of the pure silver speaker cables from Audio Note. A single conductor composed of 13 strands 0.22mm diameter of 99.999% litz silver speaker wire. Also known as the AN-SPa speaker cable. Overall diameter 4.75mm.

Litz is composed of very fine strands of high-purity silver wire insulated from each other with a fine polyurethane coating, then bundled to form a larger gauge wire. The varnish on each strand must be scraped off before a good solder joint can be achieved. You can flatten the wire, then use a single-edged razor blade held 85-90 degrees to "shave" the varnish off the wire. After removing most of the varnish, use a 40-watt solder iron and a bit of solder to burn off the rest. A scum will bubble up and harden after the wire cools off. A solder pot can also be used to burn the varnish off.

Sold in multiples of 0.5 metre (single conductor), supplied in one continuous length.

So for a 2m mono length (for one speaker), please order 8 of them.

PRICE (0.5m length)
£59.03 +vat+p&p