Welcome to Hificollective, to create an account please register here

x

ScanSpeak 15W, 8530K00 MidWoofer - Revelator Range

ScanSpeak 15W, 8530K00 MidWoofer - Revelator Range

Revelator midwoofers are famous for their Scanspeak Sliced Paper Cones, the slices are filled with damping glue. The effect is to reduce break-up nodes in the 6" cone, and give a midrange clarity and overall smooth frequency response which has made this top audiophile range uniquely successful.

Low Loss linear suspension, large ferrite magnet system and a high output. Symmetrical Drive Motor System, Low Damping SBR Rubber Surround.

Specification:

  • Resonance frequency [fs] 30 Hz
  • Mechanical Q factor [Qms] 4.90
  • Electrical Q factor [Qes] 0.29
  • Total Q factor [Qts] 0.27
  • Force factor [Bl] 7 Tm
  • Mechanical resistance [Rms] 0.50 kg/s
  • Moving mass [Mms] 13 g
  • Suspension compliance [Cms] 2.16 mm/N
  • Effective diaph. diameter [D] 110 mm
  • Effective piston area [Sd] 95 cm²
  • Equivalent volume [Vas] 27.4 l
  • Sensitivity (2.83V/1m) 85.5 dB
  • Ratio Bl/√Re 2.91 N/√W
  • Ratio fs/Qts 110 Hz

Electrical Data: 

  • Nominal impedance [Zn] 8 Ω
  • Minimum impedance [Zmin] 6.9 Ω
  • Maximum impedance [Zo] 104 Ω
  • DC resistance [Re] 5.8 Ω
  • Voice coil inductance [Le] 0.35 mH

Power Handling:

  • 100h RMS noise test (IEC 17.1) 60 W
  • Long-term max power (IEC 17.3) - W

Voice Coil and Magnet Data:

  • Voice coil diameter 38 mm
  • Voice coil height 18 mm
  • Voice coil layers 2
  • Height of gap 5 mm
  • Linear excursion ± 6.5 mm
  • Max mech. excursion ± 9 mm
  • Unit weight 1.7 kg

Price: (1off)
£142.46 +vat +p&p

 

Subscription to Hifi Collective