ScanSpeak 18W, 8545-01 MidWoofer - Classic Range

Click to Zoom
ScanSpeak 18W, 8545-01 MidWoofer - Classic Range

This unit is an improved version of the highly praised 18W/8545-00 mid-woofer, where a new aluminium chassis, an updated cone and a new spider, as well as a few other details, are introduced; these updates improve mechanical stability and sound performance. High-quality magnet system design with patented Symmetric Drive (SD-1) continues to be key feature.

Features:

  • Patented Symmetrical Drive Motor Design
  • Coated Air Dried Paper/Carbon Fibre Cone
  • 42mm Voice Coil w. Alu foil
  • Low-Loss linear suspension
  • Low Damping SBR Rubber Surround
  • Aluminium Chassis

T-S Parameters:

  • Resonance frequency [fs] 25 Hz
  • Mechanical Q factor [Qms] 1.55
  • Electrical Q factor [Qes] 0.22
  • Total Q factor [Qts] 0.20
  • Force factor [Bl] 8.4 Tm
  • Mechanical resistance [Rms] 1.8 kg/s
  • Moving mass [Mms] 18 g
  • Suspension compliance [Cms] 2.3 mm/N
  • Effective diaph. diameter [D] 136 mm
  • Effective piston area [Sd] 145 cm²
  • Equivalent volume [Vas] 68.6 l
  • Sensitivity (2.83V/1m) 88 dB
  • Ratio Bl/√Re 3.53 N/√W
  • Ratio fs/Qts 125 Hz

Electrical Data:

  • Nominal impedance [Zn] 8 Ω
  • Minimum impedance [Zmin] 6.2 Ω
  • Maximum impedance [Zo] 45 Ω
  • DC resistance [Re] 5.7 Ω
  • Voice coil inductance [Le] 0.39 mH

Power Handling

  • 100h RMS noise test (IEC 17.1) 100 W

Voice Coil and Magnet Data

  • Voice coil diameter 42 mm
  • Voice coil height 19 mm
  • Voice coil layers 2
  • Height of gap 6 mm
  • Linear excursion ± 6.5 mm
  • Max mech. excursion ± 10 mm
  • Unit weight 2.3 kg

PRICE (1 off)
£143.95 +vat +p&p

PDF datasheet

Subscribe to Hifi Collective