Emission Labs Valves
We’re pleased to announce that we’re now a distributor for Emission Labs. This family-run Valve maker has an exceptional reputation, and its range has plenty for anyone who enjoys building Single Ended Amplifiers.
We stock the classic solid plate 45, the 45-M with its woven wire mesh anode, and the 45B for builders who want more power. The 45B also works at the original 45 operating point, though it takes a circuit designed for its higher rating to get the extra watts. For 2A3 owners we have the 2A3-M, with a window of woven wire mesh set into each anode. All four fit the Elekit TU-4523 & TU-4523VK 45/2A3 Single Ended Tube Amplifier Kit.
On the power supply side there’s the 5U4G-Mesh, a slow-start Rectifier for Amplifiers that specify the original 5U4G.
For 300B owners there are four matched pairs to choose from. The solid plate 300B and the mesh plate 300BM+ both suit standard 300B Power Amplifiers. The solid plate 300B-XLS and the long plate mesh 300B-XLM are worth a look if you’re planning a build that makes use of their higher anode ratings.
Every matched pair comes with Emission Labs’ individual factory measurements, so you can see how closely the two valves perform.
Emission Labs valves we currently stock
EML 45 solid plate output valve
EML 45-M mesh plate output valve
EML 45B higher-power output valve
EML 2A3-M mesh plate output valve
EML 300B solid plate output valve
EML 300BM+ mesh plate output valve
EML 300B-XLS solid plate output valve