EML 5U4G-Mesh: Emission Labs 5U4G Mesh Plate Valve
The 5U4G-Mesh is Emission Labs’ mesh plate version of the classic 5U4G. It’s a directly heated, full-wave rectifier for the high-voltage power supply in a valve amplifier. The slow-start filament brings the supply up gradually, with the valve beginning to conduct around two seconds after switch-on and reaching full current after around seven seconds.
If you’re replacing an existing valve, check the full type number first. The EML is a direct electrical replacement for the original 5U4G. Amplifiers specifying a 5U4GA or 5U4GB require a different valve. The EML is also larger than a vintage 5U4G, so allow for its 60mm diameter and 165mm overall height, including the socket. This is particularly worth checking if your amplifier has a valve cage.
Features
- Mesh plate construction with two rectifier sections and series-connected filaments to help both sections operate evenly.
- Built-in filament protection. An internal element increases in resistance as current rises, helping to protect the filament against accidental overvoltage.
- Ceramic octal base with five physical pins, four of which are electrically connected. The valve fits a standard octal socket. The related EML 5Z3-Mesh has the same electrical characteristics but uses a four-pin UX4 socket.
For DIY builders, the maximum ratings apply individually. The current available depends on the operating voltage and the type of filter used. For a capacitor-input supply, the resistance of the transformer’s high-voltage winding also matters.
Manufacturer’s guarantee — The original purchaser can register the valve with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.
Specifications
- Valve type: Directly heated, full-wave mesh plate rectifier
- Filament supply: 5VAC or DC at 3A, with a voltage tolerance of ±5%
- Maximum AC anode supply: 550V per anode
- Maximum DC output current, capacitor-input supply: 225mA
- Maximum DC output current, choke-input supply: 265mA
- Maximum first reservoir capacitor: 40µF
- Maximum repetitive peak anode current: 800mA
- Maximum single transient anode current: 4A
- Pin connections: Filament on pins 2 and 8, anodes on pins 4 and 6
- Dimensions including socket: 165mm high × 60mm diameter
- Valve weight: 130g
Sold individually
PRICE (1 off)
£290.00 +vat +p&p