EML 300B-XLM: Emission Labs 300B-XLM Valve

Click to Zoom
EML 300B-XLM: Emission Labs 300B-XLM Valves

The EML 300B-XLM is Emission Labs’ long plate mesh 300B, a directly heated output triode for valve power amplifiers. It combines the grid construction of the classic 300B with a woven wire anode in a larger glass envelope. Emission Labs designed the XLM as the successor to the original 300BM. A matched pair serves both channels of a stereo single-ended amplifier using one output valve per channel.

If you’re fitting the XLM in place of a standard 300B or a solid plate 300B-XLS, check the filament supply and the amplifier’s operating point. Each XLM draws 1.58A at 5V, compared with approximately 1.3A for the standard EML 300B and 1.48A for the XLS. The XLM also has a lower continuous anode dissipation rating than the XLS. Each valve measures 175mm high by 63mm in diameter, so check the clearance beneath any valve cage.

Features

  • Long woven wire mesh anode. EML uses the mesh for its damping properties, which help reduce mechanical ringing in the anode.
  • Gold-plated tungsten control grid for stable bias. The rigid wire helps maintain the spacing between turns as the valve warms up.
  • Suspended anode and grid assembly to reduce microphonics, with a flexible rubber joint between the hand-blown glass bulb and the black ceramic base.
  • Gold-plated pins and an individual valve number on a metal tag inside the glass. Factory measurements and matching data are supplied on the box certificate.

For DIY builders, EML tests the XLM at 400V anode voltage and 75mA anode current, equivalent to 30W anode dissipation. EML recommends running the mesh XLM at a lower bias than the solid plate XLS. The Emission Labs 300B-XLS and 300B-XLM datasheet gives separate ratings for each valve and identifies the higher-power operating points reserved for the XLS. The maximum ratings apply individually.

The XLM is best suited to amplifiers driving loudspeakers. For headphone use, EML recommends its solid plate 300B, as the noise floor of a mesh valve can be audible through headphones. For more on the differences between the original 300BM, the 300BM+ and the XLM, see EML’s guide to 300B mesh valves.

Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.

Specifications

  • Valve type: Directly heated, long plate mesh 300B output triode
  • Base: Four-pin ceramic UX4
  • Pin connections: Filament on pins 1 and 4, anode on pin 2, control grid on pin 3
  • Filament supply per valve: 5V AC or DC at 1.58A
  • Filament voltage tolerance: −4% to +5%, giving 4.8–5.25V measured at the valve pins
  • Electronic filament supply: Voltage-regulated type
  • Maximum anode voltage: 600V
  • Maximum continuous anode dissipation: 41W per valve, as specified in EML’s XLM ratings table
  • Peak anode dissipation: 60W per valve
  • Maximum anode current: 110mA with fixed bias or 120mA with cathode bias
  • Grid resistor with cathode bias: 100kΩ recommended, 150kΩ maximum
  • Typical values at 400V/75mA: −88V grid bias with DC filament heating and 6.2mA/V transconductance
  • Dimensions including base, excluding pins: 175mm high × 63mm diameter
  • Weight per valve: 140g

Sold as a matched pair

PRICE (1 pair)
£745.00 +vat +p&p

Subscribe to Hifi Collective