EML 45B: Emission Labs 45B Valve
The EML 45B is Emission Labs’ higher-power version of the classic Type 45 directly heated output triode. It fits a standard four-pin 45 amplifier and uses the same 2.5V filament supply. In a classic RCA single-ended circuit, it delivers around 2W per valve. Its advantage for DIY builders is the 22W continuous anode dissipation rating, which allows up to 5.2W per valve in an amplifier designed for the 45B.
If you’re replacing a pair of standard 45s, the 45B can run at the amplifier’s existing operating point. Getting the extra output requires a circuit designed or modified for the higher anode voltage and suitable transformer load. The compatibility works in one direction: a standard 45 or 45 Mesh should only be fitted to a 45B amplifier if the amplifier is set up for that valve’s ratings.
Features
- Four-pin ceramic UX4 base for use in conventional Type 45 sockets.
- Suitable for single-ended Class A amplifiers, from the original RCA operating point to dedicated higher-power 45B designs.
- Supplied as a matched pair, suitable for a stereo single-ended amplifier using one output valve per channel.
For DIY builders, the choice of output transformer makes a difference even with the same anode voltage and current. At 408V and 48mA, EML gives 3.6W into a 9.2kΩ primary, 4.5W into 6.5kΩ and 5.2W into 5kΩ. The 9.2kΩ load gives the highest damping factor of the three. With the 5kΩ load, EML quotes 3% second-harmonic distortion at 4.5W, rising to 5.6% at the full 5.2W.
Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.
Specifications
- Valve type: Directly heated Type 45B output triode
- Base: Four-pin ceramic UX4
- Filament supply per valve: 2.5V AC or DC at approximately 1.5A, with a voltage tolerance of ±5%
- Electronic filament supply: Voltage-regulated type
- Maximum standby time with filament supply only: 2 hours
- Maximum anode voltage: 420V
- Maximum anode current: 53mA
- Minimum anode dissipation: 8.5W
- Maximum continuous anode dissipation: 22W per valve
- Maximum single-ended Class A output: 5.2W per valve
- Maximum grid resistor: 500kΩ
- Classic RCA operating point: 275V anode-to-cathode at 36mA, giving 2W into a 4.6kΩ output transformer primary
- Interelectrode capacitance: 7pF grid to anode, 4pF grid to filament and 3pF anode to filament
- Dimensions including base, excluding pins: 145mm high × 58mm diameter
- Weight per valve: 140g
Sold as a matched pair
PRICE (1 pair)
£620.00 +vat +p&p