EML 45: Emission Labs 45 Valve
The EML 45 is Emission Labs’ solid plate version of the original RCA Type 45, a directly heated output triode well suited to low-power valve amplifiers and high-efficiency loudspeakers. Emission Labs brought the 45 back into production in 2001, retaining the four V-shaped filaments of the vintage American valve. This version has the standard four-pin base and is supplied as a matched pair.
In a single-ended amplifier, one EML 45 typically delivers 1.6–2W, depending on the operating point and output transformer. A matched pair will therefore serve both channels of a stereo single-ended amplifier, or one channel of a push-pull amplifier. For single-ended use, Emission Labs suggests loudspeakers with a sensitivity of around 96–99dB or higher. With sensitive horn systems, a low-hum filament supply is particularly important.
Features
- Four V-shaped filaments preserve the internal geometry of the original RCA 45. An internal filament centre tap helps reduce hum in this directly heated design.
- Gold-plated control grid for stable bias and very low grid current. The hard tungsten grid wire helps maintain precise spacing between the turns.
- Suspended anode and grid assembly to reduce microphonics, housed in a hand-blown glass bulb with a black ceramic base and gold-plated pins.
- Each valve carries its own number on a metal tag inside the glass. The test certificate records grid voltage, anode current, transconductance and filament current.
For DIY builders, EML gives two useful single-ended operating points. At 250V from anode to cathode and 34mA, a 3.9kΩ output transformer primary gives around 1.6W. At 275V and 36mA, a 4.6kΩ primary gives around 2W. Both figures are for Class A1 with cathode bias.
Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.
Specifications
- Valve type: Directly heated solid plate output triode, RCA Type 45 equivalent
- Base: Four-pin ceramic UX4
- Pin connections: Filament on pins 1 and 4, anode on pin 2, control grid on pin 3
- Filament supply per valve: 2.5V AC or DC at approximately 1.5A, with a voltage tolerance of ±5%
- Electronic filament supply: Voltage-regulated type
- Maximum standby time with filament supply only: 2 hours
- Maximum anode voltage: 300V
- Maximum anode current: 45mA
- Maximum continuous anode dissipation: 11W per valve
- Maximum Class A output: 2.5W per valve
- Maximum grid resistor: 500kΩ with cathode bias or 100kΩ with adjustable fixed bias
- Amplification factor: 3.5
- Anode resistance: 1.75kΩ at 250V/34mA or 1.67kΩ at 275V/36mA
- Transconductance: 2mA/V at 250V/34mA or 2.1mA/V at 275V/36mA
- Typical push-pull output per pair: 4.6–5.5W in Class A1 or 6–7.4W in Class AB1
- Typical Class AB2 output per pair: 12.7–13.2W with a low-impedance driver capable of supplying grid current
- Dimensions including base, excluding pins: 145mm high × 58mm diameter
- Weight per valve: 140g
Sold as a matched pair
PRICE (1 pair)
£585.00 +vat +p&p