EML 300BM+: Emission Labs 300BM+ WE Compatible Valve

Click to Zoom
EML 300BM+: Emission Labs 300BM+ WE Compatible Valves

The EML 300BM+ is Emission Labs’ mesh plate version of the classic Western Electric 300B. It’s a directly heated output triode designed as a direct replacement in standard 300B power amplifiers. The plus sign is important when choosing a replacement: the earlier 300BM has a higher filament current and a lower anode dissipation rating. The 300BM+ uses a standard 5V filament supply and draws approximately 1.3A per valve.

If you’re replacing an original Western Electric 300B, the EML glass envelope is the same diameter but stands 15mm taller, so check the clearance beneath any valve cage. The 300BM+ is intended primarily for amplifiers driving loudspeakers. For headphone amplifiers and preamplifiers, Emission Labs recommends the solid plate 300B, as the higher noise level of a mesh valve can be audible in these applications.

Features

  • Mesh plate construction with the electrical ratings of the standard EML 300B.
  • Gold-plated control grid for stable bias. The rigid tungsten grid wire helps maintain even spacing as the valve warms up.
  • Suspended anode and grid assembly to reduce microphonics, with a flexible rubber joint between the hand-blown glass bulb and ceramic base.
  • Black ceramic four-pin base with gold-plated pins. Each valve carries its own number on a metal tag inside the glass.
  • Factory-matched for control grid voltage and transconductance, with individual test results supplied on the box certificate.

For DIY builders, EML gives a useful single-ended operating point of 350V at 60mA. With a 3kΩ output transformer primary, this gives around 8.3W per valve. At the same voltage and current, a 4kΩ primary gives around 7W with lower second-harmonic distortion. For best valve life, EML recommends keeping anode dissipation below 33W. 

Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.

Specifications

  • Valve type: Directly heated mesh plate 300B output triode
  • Base: Four-pin UX4
  • Pin connections: Filament on pins 1 and 4, anode on pin 2, control grid on pin 3
  • Filament supply per valve: 5V AC or DC at approximately 1.3A
  • Filament voltage tolerance: −4% to +5%, giving 4.8–5.25V measured at the valve pins
  • Electronic filament supply: Voltage-regulated type
  • Maximum standby time with filament supply only: 2 hours
  • Maximum anode voltage: 450V
  • Maximum continuous anode dissipation: 36W per valve
  • Peak anode dissipation: 40W per valve
  • Maximum anode current: 70mA with fixed bias or 100mA with cathode bias
  • Grid resistor with cathode bias: 150kΩ recommended, 250kΩ maximum
  • Typical characteristics at 300V/56mA: 700Ω anode resistance, amplification factor of 3.9 and transconductance of 5.6mA/V
  • Interelectrode capacitance: 15pF grid to anode, 8.5pF grid to filament and 4pF anode to filament
  • Dimensions including base, excluding pins: 148mm high × 65mm diameter
  • Weight per valve: 145g

Sold as a matched pair

PRICE (1 pair)
£685.00 +vat +p&p

Subscribe to Hifi Collective