EML 300B-XLS: Emission Labs 300B-XLS Valve

Click to Zoom
EML 300B-XLS: Emission Labs 300B-XLS Valve

The EML 300B-XLS is Emission Labs’ higher-power solid plate 300B. It combines the grid construction and operating characteristics of the classic 300B with the stronger anode and larger glass envelope of the vintage 52B. Its 55W continuous anode dissipation rating gives amplifier builders more scope in both single-ended and push-pull designs. A matched pair serves both channels of a stereo single-ended amplifier using one 300B per channel.

If you’re replacing a standard 300B, check the filament supply and the clearance around the valve. Each XLS draws 1.48A at 5V, compared with approximately 1.3A for the standard EML 300B. The XLS can run at the original 300B operating point in a suitable amplifier. The extra output power is available in circuits designed to make use of its higher anode voltage and current ratings.

Features

  • Solid plate anode construction derived from the 52B, with the characteristic curves of a 300B.
  • Gold-plated tungsten control grid for stable bias. The rigid wire helps maintain even spacing between the grid turns.
  • Suspended anode and grid assembly to reduce microphonics, with a flexible rubber joint between the hand-blown glass bulb and the black ceramic base.
  • Gold-plated pins and an individual valve number on a metal tag inside the glass. Factory measurements and matching data are supplied on the box certificate.

For DIY builders, EML tests the XLS at 495V anode voltage and 100mA anode current, equivalent to 49.5W anode dissipation. As a separate single-ended design example, EML estimates around 20W output at 500V and 110mA with a 3kΩ output transformer primary. That example uses the full 55W dissipation rating. The Emission Labs 300B-XLS datasheet also gives lower-dissipation operating points, anode curves and recommended Lundahl output transformers. The maximum ratings apply individually.

Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.

Specifications

  • Valve type: Directly heated, solid plate 300B-XLS output triode
  • Base: Four-pin ceramic UX4
  • Pin connections: Filament on pins 1 and 4, anode on pin 2, control grid on pin 3
  • Filament supply per valve: 5V AC or DC at 1.48A
  • Filament voltage tolerance: −4% to +5%, giving 4.8–5.25V measured at the valve pins
  • Electronic filament supply: Voltage-regulated type
  • Maximum anode voltage: 600V
  • Maximum continuous anode dissipation: 55W per valve
  • Peak anode dissipation: 60W per valve
  • Maximum anode current: 110mA with fixed bias or 120mA with cathode bias
  • Grid resistor with cathode bias: 100kΩ recommended, 150kΩ maximum
  • Typical values at the 495V/100mA factory test point: −104V grid bias with DC filament heating and 6.4mA/V transconductance
  • Dimensions including base, excluding pins: 175mm high × 63mm diameter
  • Weight per valve: 140g

Sold as a matched pair

PRICE (1 pair)
£720.00 +vat +p&p

Subscribe to Hifi Collective