EML 2A3-S: Emission Labs 2A3 Valve
The EML 2A3-S is Emission Labs’ solid plate version of the classic RCA 2A3. It’s a directly heated output triode and a direct electrical replacement for the original valve. At the standard RCA operating point, one valve delivers around 3.5W in a single-ended amplifier. The 2A3-S also suits push-pull designs and is supplied here as a factory-matched pair.
For a new amplifier build, the 2A3-S offers more scope than the original 2A3. Its continuous anode dissipation rating is 28W, and Emission Labs quotes up to 9.3W RMS from one valve in a single-ended Class A circuit designed for higher power. If you’re replacing a pair in an existing amplifier, the amplifier’s operating point determines the output. It’s also worth checking clearance beneath any valve cage, as each valve measures 175mm high by 60mm in diameter, excluding the pins.
Features
- Factory-matched for grid bias voltage and transconductance, with each valve tested at 250V anode voltage and 60mA anode current.
- Gold-plated control grid for low grid current and stable bias. The filament and grid use hard metals to help maintain their shape and spacing.
- Suspended anode and grid assembly to reduce microphonics, with a flexible rubber joint between the glass bulb and ceramic base to help isolate the valve from vibration.
- Hand-blown glass bulb and black ceramic four-pin base. Each valve carries its own number on a metal tag inside the glass, with individual test results on the box certificate.
For DIY builders, aim for 2.5V at the filament pins. Each valve draws 2.5A, so even a small voltage drop across the socket contacts can affect the voltage reaching the filament.
Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.
Specifications
- Valve type: Directly heated solid plate output triode
- Base: Four-pin UX4
- Filament supply per valve: 2.5V AC or DC at 2.5A, with a tolerance of ±4% (2.4–2.6V at the valve pins)
- Maximum anode voltage: 400V
- Maximum anode current: 100mA
- Maximum continuous anode dissipation: 28W
- Peak anode dissipation: 40W for up to 30 minutes
- Maximum grid-to-ground resistance: 250kΩ single-ended or 50kΩ push-pull
- Standard RCA operating point: 250V anode voltage, 60mA anode current and −45V grid bias, giving 15W anode dissipation
- Typical single-ended output at the RCA operating point: 3.5W per valve into a 2.5kΩ output transformer primary
- Anode resistance and transconductance at the RCA operating point: 800Ω and 5.2mA/V
- Higher-power operating point: 375V anode voltage and 75mA anode current, with a 2.25–3.75kΩ output transformer primary
- Anode resistance and transconductance at the higher-power operating point: 745Ω and 5.5mA/V
- Amplification factor: 4.1 at both operating points
- Maximum single-ended Class A output: 9.3W RMS per valve
- Dimensions including base, excluding pins: 175mm high × 60mm diameter
- Weight per valve: 140g
Sold as a matched pair
PRICE (1 pair)
£620.00 +vat +p&p