EML 300B: Emission Labs 300B WE Equivalent Valve

Click to Zoom
EML 300B: Emission Labs 300B WE Equivalent Valves

The EML 300B is Emission Labs’ solid plate, directly heated output triode. It’s a direct electrical replacement for the original Western Electric 300B made up to 1988. In a typical single-ended amplifier running at 350V and 60mA, one valve delivers around 8.3W into a 3kΩ output transformer primary. A matched pair serves both channels of a stereo amplifier using one 300B per channel.

If you’re replacing a vintage Western Electric pair, the EML glass envelope is the same diameter but stands 15mm taller. Check the clearance beneath your valve cage or cover, particularly if the original valves are a close fit. For headphone amplifiers and preamplifiers designed around the 300B, Emission Labs recommends this solid plate version.

Features

  • Gold-plated tungsten control grid for stable bias. The rigid grid wire holds its spacing as the valve heats up.
  • Suspended anode and grid assembly to reduce microphonics, with a flexible rubber joint between the glass bulb and base to help isolate the valve from vibration.
  • Hand-blown glass bulb, black ceramic four-pin base and gold-plated pins.
  • Factory-matched for control grid voltage and transconductance. Each valve carries its own number on a metal tag inside the glass, with individual measurements on the box certificate.

For DIY builders, the choice of output transformer affects both power and distortion. At 350V and 60mA, EML gives 10.2W into a 2kΩ primary, 8.3W into 3kΩ and 7W into 4kΩ. The 4kΩ load gives the lowest second-harmonic distortion of the three. EML recommends keeping anode dissipation below 33W for best valve life.

Manufacturer’s guarantee — The original purchaser can register the valves with Emission Labs within four weeks of receipt to take part in its five-year guarantee programme, subject to the Emission Labs guarantee conditions.

Specifications

  • Valve type: Directly heated solid plate 300B output triode
  • Base: Four-pin UX4
  • Pin connections: Filament on pins 1 and 4, anode on pin 2, control grid on pin 3
  • Filament supply per valve: 5V AC or DC at approximately 1.3A
  • Filament voltage tolerance: −4% to +5%, giving 4.8–5.25V measured at the valve pins
  • Electronic filament supply: Voltage-regulated type
  • Maximum standby time with filament supply only: 2 hours
  • Maximum anode voltage: 450V
  • Maximum continuous anode dissipation: 36W per valve
  • Peak anode dissipation: 40W per valve
  • Maximum anode current: 70mA with fixed bias or 100mA with cathode bias
  • Grid resistor with cathode bias: 150kΩ recommended, 250kΩ maximum
  • Typical characteristics at 300V/56mA: 700Ω anode resistance, amplification factor of 3.9 and transconductance of 5.6mA/V
  • Interelectrode capacitance: 15pF grid to anode, 8.5pF grid to filament and 4pF anode to filament
  • Dimensions including base, excluding pins: 148mm high × 65mm diameter
  • Weight per valve: 145g

Sold as a matched pair

PRICE (1 pair)
£620.00 +vat +p&p

Subscribe to Hifi Collective